There have been reports of smoke alarms sounding in the lodge. Most of the smoke alarms are interconnected 10 year sealed battery alarms that comply with current NY State regulations. The alarms are located in each bedroom, main room and the basement.
The alarms will speak words if smoke is detected or the battery is low. If they chirp or the light ring changes color it indicates a fault or prior alarm condition. An excerpt from the alarm manual is in the host room. It gives you very easy instructions on how to reset the alarms and determine which unit is causing the issue.
Members have been removing them from the rooms when they sound. Please only do this as a last resort and then notify a member of the Board or Camp Committee to check the alarms. The smoke alarms are very important for your safety!
From the manufacturer
10-Year Sealed Lithium Battery: Eliminates late night battery chirp
Bug Screen: Protects alarm from insect ingression
Flashing LED Status Ring: allows easy identification of current state of alarm
Supervised Wire-Free Interconnect: Proprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound. User is alerted if an alarm loses connection to the network.
Sealed-in Lithium Battery: No battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
Voice Notifications: Unit verbally announces “Fire!” and other alerts such as “Replace Alarm,” which helps the user better understand current status of the unit.
Easy to Install: Simply turn the switch on the back of unit or mount to bracket to activate the alarm. Multiple units can be interconnected with push of one button.
Photoelectric Sensor: Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
Ambient Light Sensing: Establishes Day/Night cycle and prevents chirping during the night until the next Day cycle begins.
Alarm Locate Feature: Quickly find initiating alarm by silencing other alarms in the network.
Test / Hush® Button: Tests alarm circuitry and activates Hush® feature to temporarily silence nuisance alarms for up to 10 minutes. End of Unit Life and Network Error chirps can also be silenced.
End of Unit Life Warning: Alerts user the alarm is in need of replacement.
Compatible with RemoteLync Bridge: Connect to the Kidde app for additional features and benefits.
10-Year Limited Warranty